It is mainly used in the bottom discharge, discharge, sampling and non dead zone shutdown operation of the reactor, tank and other containers. With the valve at the bottom flange welded to the bottom of tanks and other containers, thus removing the process medium is usually left in the container export. Discharge valve according to the actual needs of the situation, put the end of structural design for the flat type valve for the V type, and provides two modes to enhance and decrease the valve.
Note: parameters are for reference only, or are not full. Valve can be used in accordance with the requirements of different pressure, material, diameter, drive, etc.. Specific please contact or online advisory contact.
Under the expansion of the discharge valve, corrosion resistance: 1 of the use of media such as water, acetone, alcohol, ammonia, barium carbonate, benzene (WCB material temperature using -29 C -425 C). 2 prohibited the use of fluoride ionic liquids (such as HF) also cannot use alkali and phosphate (temperature less than 150 DEG C, the concentration of >30%). The general working temperature less than 3 stainless steel and 150 DEG C, the pressure range of 0.6-2.5MPA, more than the prescribed order to explain.